|
|
| Warning:
Be sure to remove the three 1/4"-20 socket head capscrews after
installing the pressure plate. These keep the pressure plate from
binding when removing the cover from the flywheel. They will also
be necessary for disassembling the cover assembly. |
|
|
| Specifications |
|
|
|
| Base
Pressure: 0 lbs |
|
| Static
Adjustment (clockwise to increase):
30 lbs/turn (maximum 8 turns) |
| Static
Range: 0-1440 lbs |
|
| Ring
Height: .200” (Bottom of
cover to top of pressure ring) |
|
1.015" (Top of cover to the pressure ring) |
|
| Lever:
LS8D (3/16") |
|
| Lever
Weight: 36 grams |
|
| Lever
height - .300"above top of cover, measured w/ straight edge |
| Torque
specifications - 75 ft/lbs stands, 85-100 ft/lbs 7/16" flywheel bolts |
|
|
| Note:
Check Flywheel bolt shoulder and overall length to make sure the bolts
do not bottom out on the shoulder or hit the back of the engine
block. Use either red or blue loctite on the flywheel bolts.
Re-torque the flywheel bolts after the first run and each time the
pressure plate is removed for servicing the unit. NEVER USE
STAR WASHERS ON AN ALUMINUM FLYWHEEL. |
|
|
| Counterweight
Adjustment |
|
| Steel
Bolt 1/4"-20 x 1 1/4" |
9.3g |
| Steel
Bolt 1/4"-20 x 1 |
7.6g |
| Steel
Bolt 1/4"-20 x 3/4 |
6.4g |
| Aluminum
Bolt 1/4"-20 x 3/4 |
2.2g |
| Steel
Nut |
3.3g |
| Aluminum
Nut |
1.1g |
| Steel
Washer |
1.0g |
|
|
| Repair
parts |
part number |
|
|
| lever,
LS8D (6) |
|
| Pin,
Lever Pivot 5/16 x 1 1/4 (6) |
|
| Pin,
Yoke Pivot 1/4 x 1 1/4 (6) |
|
| Pin,
Lever to Yoke 1/4 x 5/8 (6) |
|
| Capscrew,
Lever pin 5/16 x 18 x 1/2 (12) |
|
| Capscrew,
Yoke pivot1/4 x 20 x 1/2 (12) |
|
| Yoke
(6) |
|
| Set
screw, Lever Ht. Adjust (12) |
|
| pressure
ring w/o insert |
|
| pressure
ring Assembly w/ insert |
|
| Pressure
ring retaining bolt, 1/4 x 20 x 1 |
|
| replacement
cover |
|
| replacement
plate insert w/screws |
|
| replacement
flywheel insert w/screws |
|
| 2
disc Stand Stud (6) |
|
| 3
disc Stand Stud (6) |
|
| 3
disc Stand spacer (6) |
|
| Cover
nut |
|
| adjustable
stand (6) |
|
| Spring
Adjuster screw (6) |
|
| Spring
Adjuster nut (6) |
|
| SpringAdjuster
cap (6) |
|
| Spring
cup (6) |
|
|
|
| Disc
5191 1 3/16-18 |
1328 |
| Disc
5191 1 3/8-10 |
1331 |
| Disc
5135 1 3/16-18 |
1318 |
| Disc
5135 1 3/8-10 |
1321 |
| Floater
plate steel |
3530 |
|
|
| Gram
scale |
578 |
| Two
step switch |
580 |
| Dial
height gauge |
573 |
| Stand
strap |
583 |
| CW
set |
570 |
| CW
washer set 1-30g |
571 |
| Flywheel
bolt set 7/16 x 1 |
575 |
|
|
| Flywheel,
Chevrolet 142t |
|
| Flywheel,
Ford 142t |
|