|
|
| Specifications |
|
|
|
| Base
Pressure: 0 lbs |
|
| Static
Adjustment (clockwise to increase):
30 lbs/turn (maximum 8 turns) |
| Static
Range: 0-1440 lbs |
|
| Ring
Height: .200” (Bottom of
cover to top of pressure ring) |
|
.985" (Top of cover to top of pressure ring) |
| Lever:
LS7D, LS7T |
|
| Lever
Weight: LS7D – 36 grams |
|
LS7T - 29 grams |
| Lever
height - .450" above top of cover, measured w/ straight edge |
| Torque
specifications - 75 ft/lbs stands, 85-100 ft/lbs 7/16"flywheel bolts |
|
100-125 ft/lbs 1/2" flywheel bolts |
|
|
| Note:
Check Flywheel bolt shoulder and overall length to make sure the bolts
do not bottom out on the shoulder or hit the back of the engine
block. Use either red or blue loctite on the flywheel bolts.
Re-torque the flywheel bolts after the first run and each time the
pressure plate is removed for servicing the unit. NEVER USE
STAR WASHERS ON AN ALUMINUM FLYWHEEL. |
|
|
| Counterweight
Adjustment |
|
| Steel
Bolt 1/4"-20 x 1 1/4" |
9.3g |
| Steel
Bolt 1/4"-20 x 1 |
7.6g |
| Steel
Bolt 1/4"-20 x 3/4 |
6.4g |
| Aluminum
Bolt 1/4"-20 x 3/4 |
2.2g |
| Steel
Nut |
3.3g |
| Aluminum
Nut |
1.1g |
| Steel
Washer |
1.0g |
|
|
| Repair
parts |
part number |
|
|
| lever,
LS7D (Light Lever) (6) |
|
| lever,
LS7T (Standard Lever) (6) |
|
| Capscrew,
5/16 x 18 x 1/2 (12) (lever pin) |
|
| Capscrew,
1/4 x 20 x 1/2 (12) (plate pin) |
|
| Pin,
Lever Pivot 5/16 x 1 (6) |
|
| Pin,
Yoke Pivot 1/4 x 1 1/4 (6) |
|
| Pin,
Lever to Yoke 1/4 x 5/8 (6) |
|
| Yoke
(6) |
|
| Set
screw, Lever Ht. Adjust (12) |
|
| pressure
ring, w/o insert |
|
| pressure
ring Assembly, w/ insert |
|
| Pressure
ring retaining bolts, 1/4 x 20 x 1 |
|
| replacement
cover |
|
| replacement
plate insert w/screws |
|
| replacement
flywheel insert w/screws |
|
| 2
disc, Stand Stud (6) |
|
| 3
disc Stand Stud (6) |
|
| 3
disc Stand spacer (6) |
|
| Cover
nut |
|
| adjustable
stand (6) |
|
| Spring
Adjuster screw (6) |
|
| Spring
Adjuster nut (6) |
|
| Spring
Adjuster cap (6) |
|
| Spring
cup (6) |
|
| Ring
gear 142 tooth .300 thick |
|
| *note
- we must grind this ring gear prior to shipment |
|
|
| Disc
5191 1 3/8-10 |
1311 |
| Disc
5191 1 3/16-18 |
1308 |
| Disc
5135 1 3/8-10 |
1312 |
| Disc
5135 1 3/16-18 |
1307 |
| Floater
plate steel |
3540 |
| Floater
plate bronze |
4527 |
|
|
| Gram
scale |
578 |
| Two
step switch |
580 |
| Dial
height gauge |
573 |
| Stand
strap |
583 |
| CW
set |
570 |
| CW
washer set 1-30g |
571 |
| Flywheel
bolt set 7/16 x 1 |
575 |
|
|
| Flywheel,
Chevrolet 142t |
|
| Flywheel,
Ford 142t |
|
