| Warning:
Be sure to remove the
three 1/4"-20 socket head capscrews after installing the pressure
plate. These keep the pressure plate from binding when removing
the cover from the flywheel. They will also be necessary for
disassembling the cover assembly. |
|
Specifications
|
|
|
|
| Base
Pressure: 0 lbs |
|
| Static
Adjustment (clockwise to increase):
30 lbs/turn (maximum 8 turns) |
| Static
Range: 0-1440 lbs |
|
| Ring
Height: .750" (Top of cover to top of pressure ring) |
| Lever: |
|
| Lever
Weight: 25 grams |
| Lever
height - |
| Torque
specifications - 65 ft/lbs stands, 85-100 ft/lbs 7/16"flywheel bolts |
|
|
| Note:
Check Flywheel bolt shoulder and overall length to make sure the bolts
do not bottom out on the shoulder or hit the back of the engine
block. Use either red or blue loctite on the flywheel bolts.
Re-torque the flywheel bolts after the first run and each time the
pressure plate is removed for servicing the unit. NEVER USE
STAR WASHERS ON AN ALUMINUM FLYWHEEL. |
|
|
| Counterweight
Adjustment |
|
| Aluminum
Bolt 1/4"-20 x 3/4 |
2.2g |
| Aluminum
Bolt 1/4"-20 x 1/2 |
1.8g |
| Steel
Nut |
3.3g |
| Aluminum
Nut |
1.1g |
| Steel
Washer |
1.0g |
| Steel
Washer (Thin) |
.5g |
