| Warning:
Be sure to remove the three 1/4"-20 socket head capscrews after
installing the pressure plate. These keep the pressure plate from
binding when removing the cover from the flywheel. They will also
be necessary for disassembling the cover assembly. |
|
|
| Specifications |
|
| Base
Pressure & static adjustment (counterclockwise to increase) |
| 420
lbs (yellow spring) 15
lbs/turn |
|
| 690
lbs (black spring) 20
lbs/turn |
|
| 950
lbs (red spring) 30
lbs/turn |
|
| Static
Adjustments (counterclockwise to increase): |
| 20
Lbs/turn (black) |
| 30
lbs/turn (red) |
| 15
lbs/turn (yellow) |
| Torque
Specifications: 75 ft/lbs stand bolts, 85-100 ft/lbs 7/16 flywheel bolts |
|
100-125 ft/lbs. 1/2" Flywheel bolts |
| Ring
height - .200" (bottom of cover to top of pressure
ring) |
|
1.015" (top of cover to pressure ring) |
| Lever
weights - |
| Lever
height - |
| Note:
Check the flywheel bolt shoulder and overall length to make sure the
bolts do not bottom out on the shoulder or hit the back of the engine
block. Use either red or blue loctite on the flywheel bolts.
Re-torque the flywheel bolts after the first run and each time the
pressure plate is removed for servicing the unit. NEVER USE STAR
WASHERS ON AN ALUMINUM FLYWHEEL. |
| Counterweight
Adjustment |
|
| Steel
Bolt 1/4"-20 x 1 1/4" |
9.3g |
| Steel
Bolt 1/4"-20 x 1 |
7.6g |
| Steel
Bolt 1/4"-20 x 3/4 |
6.4g |
| Aluminum
Bolt 1/4"-20 x 3/4 |
2.2g |
| Steel
Nut |
3.3g |
| Aluminum
Nut |
1.1g |
| Steel
Washer |
1.0g |
|
|
| Lever
Pressure Applied (1 gram per lever) |
|
| 5000
51lbs. |
|
| 6500
85lbs. |
|
| 7400
111lbs. |
|
| 9500
195lbs. |
|
|
|
|
|
|
|
|
|
|
|
