|
New in
Clutch University
What's
the best way to drive my manual transmission car?
| |
|
|
RAM Pro Series release
bearings
|
|
|
|
|
|
RAM introduces our new release bearings for drag
racing clutches in 7,8, 10, and 11 inch diameters. The release
bearing is constructed utilizing a sealed bearing with a tool steel
contact face. The sealed design eliminates bearing run out and will
not sling grease out on to the clutch assembly as traditional bearings
commonly do. Bearings are available in fork style configuration;
cross shaft models will be available soon! Fork type bearings have
anti-rotational collars.
Small diameter 6.25 release bearings have
an aluminum anti-rotational collar and are designed not to deposit grease
on to the clutch assembly and weight in at only .75 lbs.
New RAM Clutches in 7,8,10, or 11 inch usually
require bearing 40-070. New RAM 6.25 Clutches require bearing
40-010. If you are unsure what length to purchase, measure your
existing bearing length and refer to the chart below:
|
|
Application
Part
no.
| 6.25
inch clutch bearings |
|
|
| Bearing
2.000 OAL |
RAM
6.25 inch clutches |
40-010 |
| Bearing
2.250" OAL |
Most
6.25 inch clutches |
40-020 |
|
|
|
| 7,8,10,11
inch clutch bearings |
|
|
| Bearing
2.250" OAL |
7,8,10,11
inch clutches |
40-060 |
| Bearing 2.500"
OAL |
7,8,10,11
inch clutches |
40-070 |
|
|
|
| Replacement
bearings |
|
|
| Bearing
adapter |
6.25
inch clutches |
40-300 |
| Replacement
bearing |
7,8,10,11
inch clutches |
40-310 |
| Replacement
bearing |
6.25
inch clutches |
40-320 |
|
|
