C4 Conversion Clutch

RAM clutches proudly introduces a system to replace the limited capability pull style clutch/dual mass flywheel system in later model Corvettes. The RAM system consists of aluminum flywheel, Hi-Clamp pressure plate with 2800 pounds clamp load, and your choice of disc to suit your power level. An internal hydraulic bearing replaces the factory release mechanism to complete the install. This system is capable of up to 700 horsepower holding capacity! Eliminates the factory pull clutch system for unlimited upgradability!

1989-92 L98 900800 10.5 x 1 1/8-26

1992-93 LT1 900800 10.5 x 1 1/8-26

1994-96 LT1/LT4 900810 10.5 x 1 1/8-26

1989-93 ZR1/LT5 900820 10.5 x 1 1/8-26

1994-96 ZR1/LT5 900830 10.5 x 1 1/8-26

Above sets include 300 series disc and steel ring pressure plate. Add suffix‘X’ for 900/300 series disc, ‘N’ for 900 series disc, suffix ‘A’ for alumium pressure ring cover.

NOTE: Above listings are for factory engine/body combinations. You must specifyany special balance or changes to the driveline when ordering to assure receiving the correct clutch system for your application.

Eliminating the dual mass flywheel and using the semi-rigid hub in the RAM disc will cause some gear rattle in the driveline under light load.